Kitchen Equipment

✨ MEIKO SPARE PARTS - MEIKO ERROR CODE - SERVICE MANUAL




meiko dishwasher how to programme|mkn combi oven|rational oven|cooktek parts
winterhalter dishwasher password|elecrolux paremeter|microwave oven how to repairing.

 

 

Note : Subscribe E-Mail and YouTube to get more information, we are ready to help you our best

don't hesitate to contact us.

Maintaining commercial kitchen equipment  helps keep your kitchen and best to be familiar with
the restaurant and Hotel equipment by reviewing the owner's manual to Contact a                        
professional repair technician to conduct regular planned.

Future of Conveyor dishwashing machine Amazing Option with MEIKO M- iQ
training for the correct handling of Meiko pass-through warewashers of the Series. A step by step cleaning guide in combination with an automatic self cleaning programme  makes sure the ware washer is in perfect conditions for the next use.

This hygiene cycle helps assist you in this deep clean of the dishwasher. It will remove stodge build ups, it will clean and degree , and it will make the machine smell nice To begin the hygiene cycle process, simply scroll through the options of the display panel and select ‘Hygiene

Maintaining commercial kitchen equipment  helps keep your kitchen and best to be familiar with the restaurant and Hotel equipment by reviewing the owner's manual to Contact a  professional repair technician to conduct regular planned.



 


Code – input: 

View service data:               CODE 10000 

Modify service data:            CODE 10001 

View configuration data:     CODE 20000 

View dosing technology:     CODE 40000 

Modify dosing technology: CODE 40044 

            ENTER TO GET SERVICE CODE👇




INFO-no. Description Possible cause 120 Emergency program active Restricted washing possible. Noboiler / tank heating No fresh water inlet Check system 121 Hood not closed Check connection S1 Change microswitch Check microswitch adjustment Replacing a defective I/O circuit board 122 Incorrect password / no authorization Enter code once again 123 Factory setting parameter list Switch power supply ON/OFF within 5 minutes and set back to factory settings. This will be rejected and parameters will be retained. Information 123 will disappear. 420 Shortage of rinse agent If the machine is ready for operation, a shortage of rinse agent will be signalled (only if there is a built-in warning system). 520 Shortage of detergent If the machine is ready for operation, a shortage of detergent will be signalled (only if there is a built-in warning system). 720 Regeneration in progress Regeneration program has started and is in progress. (It is possible to pause the program, but not cancel it.) 721 Regeneration is not possible as no salt available Regeneration is necessary, but no brine available 722 Refill with salt No brine available Check salt supply No water in the salt solution reservoir. Float switch S5 not working

Information indications can be deleted using the confirmation key. Provided that the operation of the machine has been established, the next program sequence will begin. Pressing the “OFF” key will also delete the information indication

INFO-No

Description

Possible cause

120

Emergency program active Restricted washing possible

No boiler / tank heating No fresh water flowing in Check system

121

Hood not closed

Switch lever released Check connection S1 Change microswitch Check adjustment microswitch

122

Incorrect password / no authorization

Enter code again

 

 NEXT PAGE 👇

 

Fault indications will be automatically deleted once the fault has been corrected. Fault indications (extract)

ERROR.-No

Description

Possible cause

111

Floor pan leakage

Leakage inside the machine Pump sump / motor / etc. Defective leaking water switch Repair fault, remove water

201

Level not reached during first filling.

Fresh water supply insufficient (water faucet closed) Aquastop hose kinked Inlet strainer soiled Aquastop defective Boiler switch defective

202

Level not reached early enough during filling

See 201

 

 

 


ERROR.-No

Description

Possible cause

301

Number of pumping cycles exceeded Tank level analysis disrupted

Pressure increasing pump yield too low Rinse jets soiled Air catch soiled Pressure increasing pump rotor defective Condensate in level pipe Hose kinked / loose / not watertight

302

At pumping out during rinse program, level does not fall below level 1.

Wash water pump yield too low Wash water pump soiled / defective Rotor loose Wash water pump plug connector loose Start capacitor defective Tank level analysis disrupted Aquastop not closing completely No signal from ON/OFF circuit boards

303

Level does not fall below level 3 after time (LP ON)

See 302

306

Maximum level value exceeded Tank level analysis disrupted

Ventilation valve soiled Check tank level Check level sensor air catch / hose




how to do the troubleshooting and follow the professional way to find out the technical 
issues and fixed the problems.need to go  trough service manual. if you have any technical 
issues, questions don't hesitate to get in touched.
Troubleshooting Support's.
Please feel free to contact Us👍.

Follow By Email Get All Latest Content Delivered Straight To Your Inbox.


Service Manual 🔧 Wiring Diagrams 🔧 Troubleshooting 🔧 How to Installing 🔧How to use Descaling How to Use Function Test🔧Auto Cleaning Function🔧How to use Cooking Function How to Use Flue Gas Analyse.     








Post a Comment

0 Comments